15 May. 19

Moving your thermostat: How to and Benefits

Let us assume that your HVAC equipment is in good health and your thermostat is connected to the internet, would you contemplate moving it? Of course, not! However, if your thermostat is not maximizing comfort and saving you energy, then you may need to change its location as soon as possible.

A properly-placed temperature sensor which is inbuilt to the thermostat determines the temperature that your family and guests enjoy. The sensor allows your cooling and heating system to deliver the proper heat or cold necessary to keep you comfortable and happy. Placing the sensor wrongly can make your HVAC equipment run too long, or not suitably long, or in short bursts.

When your thermostat is in the wrong location, it can cause problems like discomfort. It may also waste your energy, resulting in increased power bills. Your HVAC thermostat then begins to suffer wear and tear, until you consider moving it. Perhaps you do not know that it is possible to relocate your thermostat on your own? Or, you do not know how to go about moving your HVAC thermostat?


Read on to learn guidelines on how to run it successfully without damaging any of its parts. You will also understand the benefits that come with changing the location of your thermostat and setting it with a complete schedule. First, you should know precisely why it is necessary to move your thermostat.

Why you should move your thermostat

Generally, there are two primary reasons for moving HVAC thermostats. One, when the thermostat becomes unsightly. This can occur if it was placed poorly before you bought your house, or after renovating it. In this case, you may move the thermostat to another position on the same wall, or move it onto an adjacent surface of the wall.


The second common reason for moving your HVAC thermostat is to balance air control better. The wrong placement can lead to uneven cooling or heating throughout your house. In lieu of this, you may have to deal with higher utility costs and spending more than you need to on energy.

Hence, it is essential for you to know the use, condition, and areas where your thermostat will begin to malfunction if you place it there. If you are about moving into a new house, or where you presently reside, the following locations should give you concern about your thermostat.

Where you should not place your thermostat


1.Opposite a window

Your window is a significant source of heat gain. As a result, it affects your thermostat if you position it across from the window. As solar energy continues to stream in during a sunny day, the thermostat will perceive that your home is a lot warmer than it is. Consequently, it can reduce the effectiveness of your furnace as it may not work the way it should.

2. Close to the HVAC vent

The vents of your HVAC provide cold or warm air to your home, depending on what season it is. So, moving your thermostat away from HVAC vents is a great idea. This way, your thermostat will sense the air emitting through and work with the system accordingly.

3.Inside the kitchen

The kitchen is known to produce more heat than every other room in the home. Whether you are heating your pot of soup or baking a cake, you would not want your thermostat to sense such an amount of heat. Switching the location to a colder area will make the thermostat more effective.

4.On an exterior wall

An exterior wall can absorb heat from outdoors so it is not a placement option for your thermostat. On the hand, interior walls are better in accurately reflecting the precise temperature inside the home. Also, you will not be able to feel the impact of your thermostat if you place it outside, so interior walls are your best bet in terms of location.

5. In the way of objects

You should not let any objects hinder the access of your thermostat to space. Bookshelves, furniture, curtains, decor, and artwork can all reduce the efficiency of the thermostat. It is better to keep it on a clear wall where nothing will block its face.

The vital thing about moving your HVAC thermostat is to avoid places that can have extreme temperatures. Irregular temperature deceives the system into thinking that the room is warmer or colder than it is. For instance, you should not install your thermostat close to doors that can let in drafts. Neither should it be near windows that shine the rays of the sun onto your thermostat.

Furthermore, placing your thermostat near a bathroom door is wrong, as hot steam may settle around the thermostat. In the same vein, the United States office of Energy Efficiency and Renewable Energy recommends against moving your thermostat near TV sets or lamps since they release heat that may confuse the sensors of the equipment.

The best location for your thermostat

Place your thermostat in one of the rooms that you use regularly. Interior walls will give you the best results. Perhaps you have a smart thermostat? Then you should make sure that doors, decorations, or bookshelves are not obstructing it. Otherwise, the thermostat sensors will not work correctly.

Also, ensure that your smart thermostat is not far from your Wi-Fi so that the thermostat will not lose its connection with your account. For the most comfort and energy savings, linking several thermostats throughout your home is ideal. If you do not like wiring, you can choose wireless thermostats.

Related article: Does my HVAC need a smart thermostat?

How to move your thermostat

There are two cases where changing the location of your thermostat may be a significant project. They include when you need to replace it with a new and better one, and when you intend to move it to an adjacent surface. On both occasions, you may not have to rewire the thermostat. It is then quite easy to relocate it.

You will likely have to buy one length of thermostat wire if you will be moving the system more than a few feet from its original position. Many people do not usually have lots of slack, but the remaining tools – the drill bits, cordless drill, and string, typically are already in the house. The next step is to splice the new wire right to the old one since it has a low-voltage.

It is advisable to move your thermostat temporarily for a while initially before completely removing it from the wall and then unwiring it from its present location.


To do this follow these steps:

  • From below the thermostat, that is, the basement, run the wire of the thermostat from the valve with zone control.
  • Run the wire to the floorboards under the new location. Just ensure that the new location of the thermostat is not right on the top of a heat source.
  • After doing so, remove the pieces of floor trim under where you want to install the thermostat. Use a 5 by 8-inch drill bit at the point where the base of the floorboards and drywall intersect. Do this so that the trim is hidden when you fix another.
  • Then bore a large hole downwards into your basement. Have someone standing below to help you pinpoint where you have the drill.
  • Otherwise, you may tie something tiny, maybe a bead, to a string and lower it into the home so that you can find it when you need it. Then, thread the new wire of the thermostat upwards through the hole.
  • You do not need to install the floor trim yet. Instead, you should connect the thermostat and place it on an interior wall at your desired height (4 by 10 inches is appropriate).

Switch on the heat button and see if the temperature of the room improves with the new location. Also, take note of whether any previously comfortable places become too cold or warm. Find balance in the thermostat temperature for both night and day.

Moving your HVAC thermostat might make a difference instantly. Rather than the thermostat heating only your dining room and turning off before enough heat circulates into the bedroom hallways, it measures the air temperature and distributes it properly. Being able to manipulate the temperatures to your taste is the best part of moving a thermostat; comfort is key.

To make the location of your thermostat permanent, follow these steps:

  • Remove it from the temporary position, and unwire it. Use the 5 by 8 inch bit to drill through the drywall.
  • Just below the hole, at a baseboard level exactly where the wire emerges from the basement, do the same. The cable will have to emerge from the basement.
  • Enter the wall between their studs and go straight upwards at the back of the drywall to the new location of the thermostat.
  • The way to navigate the wire that runs up from the basement through the is to find a piece of sturdy string. And, tie something little to the end – a tiny hex or glinting metal will work correctly. Place the string’s end with the object under the while at the top of the wall, while holding onto it’s ending.
  • As the thread goes down through the wall, kneel and search around for the glinting metal. Be ready to get it whatever way you can. You can use a needle nose plier, your pinkie finger, or an unfurled paperclip. Then pull the string out from behind the drywall. You should still be able to see the string while it is going in from the wall top. This is so you can wrap the string and the wire together when you tie the rope to the thermostat wire.

This method is so secure except you select a wimpy string. Then, you may have to repeat the process two or three times. Choose something a bit heavier than an embroidery thread. Once you can hook the thermostat back up, then refix it on the wall above the hole you made. Put the floorboards back along with the trim. That’s all!

Nevertheless, remember that you should first cut off electricity from your HVAC system before working on the project. Although the steps above seem easy, they can be tricky. If you feel that you may not be careful enough in moving your thermostat, thereby causing damage to any electrical part, then contact a professional HVAC specialist to handle the task.

Benefits of moving your thermostat

Here are some essential benefits that moving your HVAC thermostat will provide you.

1.Reduces utility costs
When you move your thermostat to a more appropriate location in the house, it will not run longer than necessary and will not produce excess cold or warm air. This, in turn, reduces its use of energy. Therefore, you save money because the utility costs will significantly diminish.

2. Provides comfort to you and your family
Your family and visitors can now enjoy a more comfortable atmosphere with the right room temperature. When the air is just proper for the season, and it suits you, you feel more relaxed, and you can enjoy your home better.

3. Enhances the interior decor
Your interior decorations may lose their appeal of your thermostat is placed in a terrible location that does not suit its style. Moving your thermostat to a better location can add to the aesthetics of the room you put it in. Subsequently, removing it from the wrong placement creates space for other elements in the room.

When it is time for an upgrade to your thermostat, do not hesitate to replace it with a programmable thermostat. Programmable thermostats can switch on automatically anytime you wish. They are useful when you need the temperature of your home cool before you reach home on a hot day. You can even make them switch on or off while you are asleep at nights, enhancing your comfort overnight.

The above tips are essential to follow anytime you feel the need to move your thermostat. They would also help to improve the durability of your HVAC system, making you rest assured about the temperature of your home.